Access Design License Plate Holder and Mudguard - Kawasaki Z800 // Z750 07-12

The support plate and mudguard brings the futuristic touch.

It has been developed to keep the necessary functions to your vehicle, as a mudguard and the possibility of putting the indicators and an L.E.D license plate lighting to European standards (lighting supplied in the kit).

The fixing, ultra reinforced is in steel of thickness of 5.mm, reinforced by folds to rigidify the whole support plate against the vibrations. It is placed on the axis of the wheel of the oscillating arm. The part of the arm is in aluminum of thickness 5.mm. The functionality of the flush wheel support is in thickness 3.mm aluminum. It has been curved to match your tire, this avoids splashing the passenger and also the driver. The location allows you to place the license plate as well as the turn signals and the approved illumination L.E.D. The entire flange plate bracket is coated with high quality matte black epoxy paint, weatherproof and stone impact resistant. A black obturator, study to the shape of the hole in your wheel arch (location of the original plate support) and provided. This prevents the infiltration of water. All French or foreign license plates are adaptable to the plate plate flush with the wheel. The plate holder, flush wheel and comply with regulations for road safety which said that the plate must be greater than 30 cm from the ground.

You can take the example of Ducati Diavel whose license plate and mounted Originally flush wheel support plate.

The pack includes:

• 1 plate holder mudguard.
• 1 reinforced with steel mounting 5mm thick.
• 1 aluminum arm 5.mm thickness
• 1 + 4 shutter BHC M6 * 20.mm. Use the 4 nuts M6 original. (The shutter is to be used to plug the hole of the original plate holder).
• 1 lighting L.E.D certified.
• 12 Shrink Crimp Connectors (clamp) for connecting LED lighting and your turn signals.

Connector wiring is done on the main wiring harness and behind the arm of the Ras wheel support plate. (Keep original taken your turn signals and license plate illumination, cut the electrical lines 15 centimeters after the original connector).

• FHC M6 screws 9 * 9 + 20.mm M6 nuts + washers 9 6.mm diameter
• 9 black nuts caches (for use on the wheel and flush mounting of the swing arm once the two parts together.)
• 9 black caps for countersunk head screw FHC (use the wheel and flush mounting of the swing arm when the two pieces together.)
• 2 cables of different colors of one meter each for connecting LED lighting
• 4 cables of different colors of one meter each for connecting the flashing.
• 1 Braided sleeving of 1.10 meters for the passage of electric cables provided with riselants.
• The indicators are not delivered

The entire product gives your motorcycle a sober and futuring style, enhancing its aggressive lines.

One year warranty